Best Selling Products

Specs Type Straight Union Port In 1/4" Port Out 1/4

Specs  Type Plug Port In 1/4"

Specs Type Ported Spool Valve Port In 1/8" NPT Port Out 1/8" NPT Exhaust 1/8" NPT Operation 2 Position Flow @ 100 psig 10.5 scfm  

Specs Head Socket Thread Size 1/4-20 Length 5/16" Point Cup With Nylon Tip Material Steel Finish Black

Specs Type Female Thread Direction Right Hand Thread Size 5/16-24 Inside Diameter 0.313" Ball With 0.437" Base to Center 1.375" Body...

Specs Description Cylinder Extension M&R Machines Gauntlet Length 2.94 in. Diameter 1.25 in.

Specs Description Off-Contact Bronze Pusher Diameter 2.00 in. Thickness 0.34 in.

Specs Standard ANSI Type Dowel Pin Diameter 0.19 in. Overall Length 0.750" Material Alloy Steel

Specs Description Brass Dowel Pin 1/2" M&R Machines Tri-Loc Length 0.50 in. Diameter 0.50 in.  

Specs Type Unibody Operator Type Twist Release Mounting Dimension 22mm Head 40mm Mushroom Contacts 2NC Light Source Non-Illuminate ...

Specs  V-Belt Type A Trade Size A33 Outside Length 35"

Specs  V-Belt Type 3L Trade Size 3L300 Outside Length 30"

The print pallets hold the garment. The LP1 uses 5 pallets, the LP2 and LP3 use 8 pallets, and the LP4 uses 10 pallets. The size of your print pall...

The lift shafts are on the front and back of each print head. They allow the frame to move up and down.

The squeegee flipper shaft connects the squeegee flipper block to the carriage.

The frame attach screw secures the frame to the frame holders. There are four on each RapidTag print head. Plastic knob is sold separately.

Solid state relay with 90-250 VAC Input and 24-440VAC 50/60HZ 80A Output. Replacement part for many large flash cures and electric dryers on the ma...

Specs Wheel Diameter 6" Bore Size 1.44" Temperature Rating 450F Where Used    SPRINT® 3000 D Gas Textile Conveyor Dryer with Dual Stacked...

Specs NC 1 Terminals Fingersafe

Specs Type Unibody Operator Type Push-Pull Mounting Dimension 30mm Head 40mm Mushroom Contacts 1NC Light Source Non-Illuminate Must...

Specs Port In 3/4" NPT Gauge With Gauge And Pressure Sensor Build-In Drain Manual Accessories 2003006 2019099-A-1 2019099C

Specs Head Socket Material Steel Thread Size 5/16-24 Screw Length 1/2 in. Thread Length Full Thread Direction Right Hand Finish Blac...

Specs Component Plug Groove Diameter 1.00 in. Panel Thickness 0.109" Head Size/Diameter 1.218" Color Black Material Nylon Where Use...