Parts

Specs Description Right Locking Cam M&R Machines Challenger Length 3.01 in. Width 0.98 in. Height 1.75 in.

Specs Description Valve Slider Assembly M&R Machines Eclipse Length 5.50 in. Width 4.00 in. Height 4.00 in.   Where Used RENEGAD...

Specs Description Squeegee Holder Bracket M&R Machines Eclipse Length 2.06 in. Width 1.50 in. Height 2.50 in. Notes Left Side W...

Specs Description Valve Actuating Lever M&R Machines Long Stroke Length 13.75 in. Width 4.00 in. Height 1.75 in.

Specs Description Front Spider Arm Cover M&R Machines Challenger 2 Length 13.00 in. Width 3.00 in. Thickness 1.50 in.

Specs Description Tri-Loc Holder Assembly M&R Machines Tri-Loc

Specs Description Adjusting Stud Length 3.75 in. Diameter 0.75 in.

Specs Description Air Cylinder Stroke Adjustment Knob 6.30" M&R Machines Alpha 8 Length 6.30 in. Diameter 1.38 in. Finish OC50000 Bl...

Please check 9161013 , in most cases just the PU bumper needs to be replaced.

Specs Description Micro X - Y Adjusting Screw Length 3.50 in.

Specs Description Squeegee Flootbar Pivot Bolt M&R Machines Sportsman Length 0.63 in. Thread Size 5/16-18

Specs Description Squeegee Flood Bar Holder M&R Machines Sportsman Length 1.91 in. Width 0.92 in. Height 3.38 in. Notes Right Side

Specs Description Squeegee Flood Bar Holder M&R Machines Sportsman Length 1.91 in. Width 0.92 in. Height 3.38 in. Notes Left Side

Specs Description Cylinder Spacer M&R Machines Uni-Kote Diameter 1.50 in. Thickness 0.25 in. Finish Painted Silver

Specs Description Cylinder Extension M&R Machines Gauntlet Length 2.94 in. Diameter 1.25 in.

Specs Description Off-Contact Bronze Pusher Diameter 2.00 in. Thickness 0.34 in.

The squeegee cylinder thumbscrew allows you to adjust the pressure the squeegee exerts on the screen; each print head has two.

The lift shafts are on the front and back of each print head. They allow the frame to move up and down.

The squeegee flipper shaft connects the squeegee flipper block to the carriage.

5/16-18 Econonuts hold the pallets to the pallet arms and holds several assemblies together on the print head. We cannot offer most of the hardware...

The frame attach screw secures the frame to the frame holders. There are four on each RapidTag print head. Plastic knob is sold separately.

Specs Description Lamp Holder Assembly M&R Machines Flip Top Platemakers Length 3.12 in. Width 1.88 in. Where Used 26-1KS PLC™ Met...

Specs Type Concave Square Width 24.50" Length 24.50" Material Aluminum Where Used 26-1KS PLC™ Metal-Halide Platemaker