Products

Belt width 91 to 152 cm (36” to 60”) & conveyor dryer chamber lengths 183 cm to 305 cm (6’ to 10’) Patriot Belt™ with the SureTrak™ Roller ...

RED BLOCKOUT is our most economical, water soluble, and solvent resistant screen filler used for blocking out screens before printing. R...

Easy to move and set up because the sensor doesn’t require a signal from the screen printing press Flash curing zones can be operated independe...

Disposable, to be used with green scrub pad handle. (Sold Separately).

Product Details Sold by the roll. Each roll is 144 inches 65 - Red  90 - White 75 - Blue  Two in one , Red for under base white , Blue for halftone...

Replacement part number for 3027263 Sold as a complete Assembly

Specs Type Angle Type of Gears Worm Ratio 40:1 Output Type Hollow Bore & Flange RH Output Diameter 1" Input Type Hollow Bor...

Specs Type Offset In-Line Type of Gears Helical Ratio 72.2:1 Output Type Output Shaft (Single) Output Diameter 40 mm Input Type Clampi...

Specs Type Concave Square Width 24.50" Length 24.50" Material Aluminum Where Used 26-1KS PLC™ Metal-Halide Platemaker

Yellow Stop Block for Tri-Loc / Tri-Sync

Description The registration system latches onto the registration bearing block to hold the print pallets in the correct position. They are not...

Job Recall™ allows operators to store numerous settings that can be recalled later Maximum image areas from 132 x 249 cm (52” x 98”) to 157 x 3...

Job Recall™ allows operators to store numerous settings that can be recalled later Maximum image areas from 117 x 173 cm (46” x 68”) to 132 x 3...

Job Recall™ allows operators to store numerous settings that can be recalled later for repeat jobs—or similar jobs—significantly reducing setup t...

Smooth, dependable operation in a sleek, compact flash cure package Reno HW™ employs higher wattage for faster flash curing Ideal for M&R...

Product Details This item only work with newer cylinders marked 2009448-DS. It will not work with older type marked 2009448. Specs Note1 Repai...

Product Details The Ricoh GEN4 greyscale printhead is suitable for a range of water, solvent and UV printers. This printhead has an integrated heat...

Print Head for Digital Squeegee 4000 , Polaris and Maverick Older Part # 70020065 and 70020065-A

RIGHT HAND REAR MICRO SUB ASSEMBLY

Shrink 30% faster than ever before with the Ripack 2200 Shrink Wrap Gun. Features Full Power Level of 72 kW or 245,000 BTU Cool Nozzle Pr...

Specs Type Female Thread Direction Right Hand Thread Size 5/16-24 Inside Diameter 0.313" Ball With 0.437" Base to Center 1.375" Body...

Product Details Sold per Inch Specs Description Rubber Seal Width 0.75" Length Sold Per Inch Thickness 0.50" Notes Used for Exposure Uni...