Skip to content

ASPE

  • ADJUST KNOB SMALL

    ASPE
    $10.00

    The 1/4-20 thread adjust knob is used in several places on the print head. Mainly for locking the registration in place. There are four on each Rap...

    View full details
    $10.00
  • ASPE , RapidTag LP1 Automatic Screen Printing Press

    ASPE

    Specs 5x Stations 1x Print Heads 2x High Density Flash Cure Units Standard Pallet Size 4″ Wide x 8 ” Long (10 cm x 20 cm) Standard Frame Size 9″ x...

    View full details
  • CORD CONNECTOR

    ASPE
    from $10.00

    The cord connector holds the power cable in place and protects it from the edges of the sheet metal control box. This part is in use on the LP-2, L...

    View full details
    from $10.00
  • DIE SPRING

    ASPE
    $10.00

    The back lash assembly regulates the distance between the two drive gears. It is located next to the indexing motor and motor cover plate. The back...

    View full details
    $10.00
  • Flash Cure SOCKET 2XL

    ASPE
    $8.00

    The flash cure lamp socket holds the halogen bulbs in the flash cure units.

    $8.00
  • LP-2XL FLOOD BARS

    ASPE
    $20.00

    The flood bar redistributes the ink after the print stroke. The size of the flood bar should match the size of the pallets and squeegees of your ma...

    View full details
    $20.00
  • LP-2XL SQUEEGEE HOLDERS

    ASPE
    from $25.00

    The flood bar redistributes the ink after the print stroke. The size of the flood bar should match the size of the pallets and squeegees of your ma...

    View full details
    from $25.00
  • Pallets for LP1 – LP4

    ASPE
    from $25.00

    The print pallets hold the garment. The LP1 uses 5 pallets, the LP2 and LP3 use 8 pallets, and the LP4 uses 10 pallets. The size of your print pall...

    View full details
    from $25.00
  • POWER CABLE

    ASPE
    $30.00

    The power cable comes assembled with a power inlet and is pre-stripped on the other end. They are sold per piece.

    $30.00
  • SCREEN CLAMP THREADED ROD

    ASPE
    $5.00

    The frame attach screw secures the frame to the frame holders. There are four on each RapidTag print head. Plastic knob is sold separately.

    $5.00
  • SCREEN LIFT SHAFTS

    ASPE
    $7.00

    The lift shafts are on the front and back of each print head. They allow the frame to move up and down.

    $7.00
  • SOLID STATE RELAY AC INPUT 80 AMP

    ASPE
    $62.00

    Solid state relay with 90-250 VAC Input and 24-440VAC 50/60HZ 80A Output. Replacement part for many large flash cures and electric dryers on the ma...

    View full details
    $62.00
  • SQUEEGEE CYLINDER O-RING SMALL

    ASPE
    $5.00

    The Squeegee Cylinder Thumbscrew O-rings cushion the impact between the squeegee cylinder and the carriage. There are two different sizes.

    $5.00
  • SQUEEGEE CYLINDER THUMBSCREW

    ASPE
    $10.00

    The squeegee cylinder thumbscrew allows you to adjust the pressure the squeegee exerts on the screen; each print head has two.

    $10.00
  • SQUEEGEE FLIPPER BLOCK SHAFT

    ASPE
    $15.00

    The squeegee flipper shaft connects the squeegee flipper block to the carriage.

    $15.00
  • STROKE CYLINDER NEW

    ASPE
    from $250.00

    The stroke cylinder moves the squeegee back and forth. The Stroke Cylinder New is universal between all of our new model standard Rapidtag machines...

    View full details
    from $250.00
  • T-SLOT NUT

    ASPE
    $5.00

    5/16-18 Econonuts hold the pallets to the pallet arms and holds several assemblies together on the print head. We cannot offer most of the hardware...

    View full details
    $5.00