Best Selling Products

Description This air fitting is present on the manifold of the machines. There are several different sizes of this type of fitting, so make sure ...

Description This air fitting splits the tubing in the machines. There are different sizes of this type of fitting, so please make sure you are or...

Description The leveling feet allow you to adjust the height of the machine and to ensure that it is perfectly level.   Additional information ...

Description The squeegee flipper block attaches the squeegee pin to the carriage.   Additional information Weight .225 lbs

Description The Squeegee Cylinder Thumbscrew O-rings cushion the impact between the squeegee cylinder and the carriage. There are two different s...

Description The size of the squeegee should match the size of your pallets and flood bar. XL Squeegee Holders (all triple durometer 65/90/65) ...

Description The frame holder bracket holds the frame into the print head.   Additional information Weight 0.394 lbs

Description The air solenoid attaches to the manifold and supplies the various cylinders in the machine with air pressure. The LP-1 uses 2, the LP...

Description Screen Clamps Knob is for the LP and LPXL Series. The frame attach screw secures the frame to the frame holders. There are four on eac...

Description Aluminum/Aluminium Screen for the LP2XL and LP4XL Printer only. Frame Size 16″ x 20″ | 40.6 cm x 50.8 cm We stock printing screens wit...

Description The T-head adjust knob holds the parts sensor bracket to the limit switch bracket. there are different sizes of this part, so please m...

Description For the LP and LPXL Series. The stroke stop sensor is a magnetic switch that stops the squeegee carriage at the appropriate position a...

Description The squeegee cylinder raises and lowers the squeegee on the print head. Each print head has two of them. This part does not include ...

Description The parts present sensor determines whether a garment is on the print pallet before the machine prints. If no garment is present, t...

Description 5/16-18 Econonuts hold the pallets to the pallet arms and holds several assemblies together on the print head. We cannot offer most o...

Specs Type Air Operated Double Diaphragm Flow 11 GPM Note 1/2" FNTP Inlet, 1/2" FNPT Outlet, Polypropylene Body Material

Replacement part number for 3027263 Sold as a complete Assembly

Specs Thread Size 1" NPT Max. Pressure 0.5 Psi Control Signal 0-20VDC

Specs Extended Length 387.5 MM Compressed Length 312 MM Mounting Type Ball Connector Ball Connector Diameter 10 MM Force 730 N

Specs Type Ball Stud Ball Stud Diameter 10 MM Thread Size 5/16-18

Specs Description Knob Length 2.00 in. Diameter 2.50 in.

Specs Type Locking Swivel Mounting Threaded Stem Wheel Diameter 2" Wheel Material Rubber Thread Size 3/8-16 Thread Length 1.50"

Specs Description Repair Kit Color Black Notes Mesh Conveyor Belt Size 8"X10" Quantity 2 Pack

Specs Handle Type Adjustable Mounting Threaded Stud Material Plastic Thread Size 3/8-16 Thread Length 1.000"

Specs Description Micro X - Y Adjusting Screw Length 3.50 in.

Specs Motor HP 7.5 HP Voltage 208/230/460V 60Hz Note 5.6 Gpm, 3500 Psi, 1450 Rpm

Specs Standard ANSI Type Cylinder Roller Diameter 1.00 in. Roller Width 0.625 in. Stud Type Standard Stud Diameter 0.375" Rolling El...

Specs Type Self-Compensating Length 3.19" Thread Size 1-12 Stroke 0.45"

Specs Type Closed Profile HTD Pitch 5 mm Length 710 mm Width 15 mm Teeth 142 Where Used    ECONOMAX D™ Electric Screen Printing Con...

Specs V-Belt Type B Outside Length 34"

Specs Width 2.00" Hight 4.00" Legth 96.00" Notes #6 Density Bevel Cut Encapsulated w/Glass

Specs Nut Finish Hex Jam Thread Size 1-14 Thread Direction Right Hand Material Steel Finish Zinc Thread Type Standard Where Used D...