Best Selling Products

Specs Description Polyurethane Bumper M&R Machines Diamondback Length 1.88 in. Diameter 1.25 in. Where Used CHALLENGER® II & ...

M&R Blue Max Head Spring  - 8010010A M&R Chameleon Head Spring - 9012004 M&R Sidewinder Head Spring - 3MW30432901 ( Old Part # 9013111 )

Product Details FIMOR has developed a new polyurethane formulation to achieve performance at an attractive price. Available in a limited range of d...

Description The squeegee pin attaches the squeegee to the carriage.   Additional information Weight .0658 lbs

Specs Thickness 0.125" Width 1.00 in. Temperature Rating 500F Material Silicone Sponge

Description This air fitting is present on the manifold of the machines. There are several different sizes of this type of fitting, so make sur...

Specs Type of Material Fiberglass Color Black Type of Finish With Flap Width 38" Length 636 in. Important Notes Belts are non cancela...

Specs Type Compression Wire Diameter 0.032 in. Outside Diameter 0.36 in. Overall Length 0.50 in. Solid Length 0.145" Material Stainles...

Where Used    PROCESSOR II E™ In-line Graphics Screen Printing Press RENEGADE™ Flatbed Graphics Press RENEGADE LS™ Flatbed Graphics Press RENEGADE ...

Specs Head Socket Material Steel Thread Size 1/4-20 Screw Length 3/4" Thread Length Full Thread Direction Right Hand Finish Black Ox...

Product Details serilor®SR squeegee is an all purpose polyurethane blade with good combined resistanceto chemicals and abrasion. It was developed t...

20 Micron Disk Ink Filter for DS-4000 , Maverick and Polaris Presses

Order 7990002 ( Same items )

Description Stepper Motor Driver   Additional information Weight 3 lbs

Description The stepper motor rotates the print pallets, moving the garments underneath the print heads and flash cures. It includes a welded...

Additional information Weight 1.343 lbs PLC PLC 24 Port LP2 LP3 & XL, PLC 36 Port LP4 & XL, PLC MINI LP1

Description The Micro assembly allows you to precisely align the various layers of your image on the LP-2,LP-3,LP-4, and LP-2XL. The Micro Bal...

Description The Micro assembly allows you to precisely align the various layers of your image on the LP-2,LP-3,LP-4, and LP-2XL. The Micro Rod...

Description The Motor cover closes the base.   Additional information Weight .816 lbs

Description 4.3″ Human Machine Interface touchscreenThe touch screen allows you to control and interact with the machine.   Additional informati...

Description All Pallets are 16 inches long, please choose the width you need.   Additional information XL Pallet LPXL 13.25" W x 16" L, Slee...

Description The registration system latches onto the registration bearing block to hold the print pallets in the correct position. They are not...

Description This air fitting splits the air tubing on the machines. It connects three tubes and has no threading.   Additional information W...

Description This air fitting is present on the manifolds in the machines. It has 1/8 NPT threading.   Additional information Weight 0.0246 lbs...

Description The T-head adjust knob holds the flash cure cover to the flash cure bracket. there are different sizes of this part, so please make s...

Description The main switch controls power to the entirety of the machine.   Additional information Weight 0.2048 lbs

Description The toggle switch actuates the index assembly. It is present on the LP-2, LP-3, LP-4, and LP-2XL.   Additional information Weight ...

Description The plug fitting is present in the manifolds of some machines.   Additional information Weight 0.0133 lbs

Description All Pallets are 8 inches long, please choose the width you need. The LP1 uses 5 pallets, the LP2 and LP3 use 8 pallets, and the LP4 u...

Description The size of the flood bar should match the size of the pallets and squeegees of your machine. Inches to CM Converter Flood Bar ...

Description The squeegee flipper shaft connects the squeegee flipper block to the carriage.   Additional information Weight .1728 lbs ...

Description The power cable comes assembled with a power inlet and is pre-stripped on the other end. They are sold per piece.   Additional inform...

Description This air fitting is present on the manifold of the machines. There are several different sizes of this type of fitting, so make sure ...

Description This air fitting splits the tubing in the machines. There are different sizes of this type of fitting, so please make sure you are or...

Description The leveling feet allow you to adjust the height of the machine and to ensure that it is perfectly level.   Additional information ...

Description The squeegee flipper block attaches the squeegee pin to the carriage.   Additional information Weight .225 lbs

Description The Squeegee Cylinder Thumbscrew O-rings cushion the impact between the squeegee cylinder and the carriage. There are two different s...

Description The size of the squeegee should match the size of your pallets and flood bar. XL Squeegee Holders (all triple durometer 65/90/65) ...

Description The frame holder bracket holds the frame into the print head.   Additional information Weight 0.394 lbs

Description The air solenoid attaches to the manifold and supplies the various cylinders in the machine with air pressure. The LP-1 uses 2, the LP...

Description Screen Clamps Knob is for the LP and LPXL Series. The frame attach screw secures the frame to the frame holders. There are four on eac...

Description Aluminum/Aluminium Screen for the LP2XL and LP4XL Printer only. Frame Size 16″ x 20″ | 40.6 cm x 50.8 cm We stock printing screens wit...

Description The T-head adjust knob holds the parts sensor bracket to the limit switch bracket. there are different sizes of this part, so please m...

Description For the LP and LPXL Series. The stroke stop sensor is a magnetic switch that stops the squeegee carriage at the appropriate position a...

Description The squeegee cylinder raises and lowers the squeegee on the print head. Each print head has two of them. This part does not include ...