aspe

Description The frame holder bracket holds the frame into the print head.   Additional information Weight 0.394 lbs

Description Screen Clamps Knob is for the LP and LPXL Series. The frame attach screw secures the frame to the frame holders. There are four on eac...

The frame attach screw secures the frame to the frame holders. There are four on each RapidTag print head. Plastic knob is sold separately.

The lift shafts are on the front and back of each print head. They allow the frame to move up and down.

Description This air fitting is present on the manifold of the machines. There are several different sizes of this type of fitting, so make sur...

Description This air fitting is present on the manifold of the machines. There are several different sizes of this type of fitting, so make sure ...

Description The air solenoid attaches to the manifold and supplies the various cylinders in the machine with air pressure. The LP-1 uses 2, the LP...

Solid state relay with 90-250 VAC Input and 24-440VAC 50/60HZ 80A Output. Replacement part for many large flash cures and electric dryers on the ma...

Description The Squeegee Cylinder Thumbscrew O-rings cushion the impact between the squeegee cylinder and the carriage. There are two different s...

Description The Squeegee Cylinder Thumbscrew O-rings cushion the impact between the squeegee cylinder and the carriage. There are two different si...

Description The squeegee cylinder thumbscrew allows you to adjust the pressure the squeegee exerts on the screen; each print head has two.   Add...

Description The squeegee flipper block attaches the squeegee pin to the carriage.   Additional information Weight .225 lbs

The squeegee flipper shaft connects the squeegee flipper block to the carriage.

Description The squeegee flipper shaft connects the squeegee flipper block to the carriage.   Additional information Weight .1728 lbs ...

Description The squeegee pin attaches the squeegee to the carriage.   Additional information Weight .0658 lbs

Description The stepper motor rotates the print pallets, moving the garments underneath the print heads and flash cures. It includes a welded...

Description Stepper Motor Driver   Additional information Weight 3 lbs

The stroke cylinder moves the squeegee back and forth. The Stroke Cylinder New is universal between all of our new model standard Rapidtag machines...

Description For the LP and LPXL Series. The stroke stop sensor is a magnetic switch that stops the squeegee carriage at the appropriate position a...

Description This air fitting splits the tubing in the machines. There are different sizes of this type of fitting, so please make sure you are or...

Description The T-head adjust knob holds the flash cure cover to the flash cure bracket. there are different sizes of this part, so please make s...

Description The T-head adjust knob holds the parts sensor bracket to the limit switch bracket. there are different sizes of this part, so please m...

Description 5/16-18 Econonuts hold the pallets to the pallet arms and holds several assemblies together on the print head. We cannot offer most o...

Description The toggle switch actuates the index assembly. It is present on the LP-2, LP-3, LP-4, and LP-2XL.   Additional information Weight ...