aspe

Description The squeegee cylinder raises and lowers the squeegee on the print head. Each print head has two of them. This part does not include ...

Right now our industry is dominated by embroidery on hats, so here at ASPE we thought, what if we can print the tread instead of stitching it?Print...

Description The size of the squeegee should match the size of your pallets and flood bar. XL Squeegee Holders (all triple durometer 65/90/65) ...

Description Aluminum/Aluminium Screen for the LP2XL and LP4XL Printer only. Frame Size 16″ x 20″ | 40.6 cm x 50.8 cm We stock printing screens wit...

The LP2 XL was originally designed for screen printing on promotional tote bags, which are one of the most popular promotional products. The LP2 XL...

Description The size of the flood bar should match the size of the pallets and squeegees of your machine. Inches to CM Converter Flood Bar ...

Multi-headed machine for three-color printing, normally used for printing on tote bags or sleeve prints. With the ability to print specialty applic...

Allowing printing for four-color images, the LP4 is our most powerful model. It’s perfect for sleeve prints, and any design that needs a little ext...

Right now our industry is dominated by embroidery on hats, so here at ASPE we thought, what if we can print the tread instead of stitching it?Print...

So you’re a screen printer and want to upgrade your equipment, but have a tight budget. We’ve got you covered! In this article, we’re going to revi...

Description The leveling feet allow you to adjust the height of the machine and to ensure that it is perfectly level.   Additional information ...

Description The main switch controls power to the entirety of the machine.   Additional information Weight 0.2048 lbs

Description The Micro assembly allows you to precisely align the various layers of your image on the LP-2,LP-3,LP-4, and LP-2XL. The Micro Bal...

Description The Micro assembly allows you to precisely align the various layers of your image on the LP-2,LP-3,LP-4, and LP-2XL. The Micro Rod...

Description The Motor cover closes the base.   Additional information Weight .816 lbs

Printing Machines for NAPKIN Once the napkin comes out of the napkin printing machine, the napkin is directly ready for packaging. The operat...

The print pallets hold the garment. The LP1 uses 5 pallets, the LP2 and LP3 use 8 pallets, and the LP4 uses 10 pallets. The size of your print pall...

Description The parts present sensor determines whether a garment is on the print pallet before the machine prints. If no garment is present, t...

Additional information Weight 1.343 lbs PLC PLC 24 Port LP2 LP3 & XL, PLC 36 Port LP4 & XL, PLC MINI LP1

Description The plug fitting is present in the manifolds of some machines.   Additional information Weight 0.0133 lbs

Description The power cable comes assembled with a power inlet and is pre-stripped on the other end. They are sold per piece.   Additional inform...

Description All Pallets are 8 inches long, please choose the width you need. The LP1 uses 5 pallets, the LP2 and LP3 use 8 pallets, and the LP4 u...

Description All Pallets are 16 inches long, please choose the width you need.   Additional information XL Pallet LPXL 13.25" W x 16" L, Slee...

Description The registration system latches onto the registration bearing block to hold the print pallets in the correct position. They are not...

Description The frame holder bracket holds the frame into the print head.   Additional information Weight 0.394 lbs

Description Screen Clamps Knob is for the LP and LPXL Series. The frame attach screw secures the frame to the frame holders. There are four on eac...

The frame attach screw secures the frame to the frame holders. There are four on each RapidTag print head. Plastic knob is sold separately.

The lift shafts are on the front and back of each print head. They allow the frame to move up and down.

Description This air fitting is present on the manifold of the machines. There are several different sizes of this type of fitting, so make sur...

Description This air fitting is present on the manifold of the machines. There are several different sizes of this type of fitting, so make sure ...

Description The air solenoid attaches to the manifold and supplies the various cylinders in the machine with air pressure. The LP-1 uses 2, the LP...

Solid state relay with 90-250 VAC Input and 24-440VAC 50/60HZ 80A Output. Replacement part for many large flash cures and electric dryers on the ma...

Description The Squeegee Cylinder Thumbscrew O-rings cushion the impact between the squeegee cylinder and the carriage. There are two different s...

Description The Squeegee Cylinder Thumbscrew O-rings cushion the impact between the squeegee cylinder and the carriage. There are two different si...

Description The squeegee cylinder thumbscrew allows you to adjust the pressure the squeegee exerts on the screen; each print head has two.   Add...

Description The squeegee flipper block attaches the squeegee pin to the carriage.   Additional information Weight .225 lbs