ASPE

Description The plug fitting is present in the manifolds of some machines.   Additional information Weight 0.0133 lbs

Description The power cable comes assembled with a power inlet and is pre-stripped on the other end. They are sold per piece.   Additional inform...

Description All Pallets are 8 inches long, please choose the width you need. The LP1 uses 5 pallets, the LP2 and LP3 use 8 pallets, and the LP4 u...

Description All Pallets are 16 inches long, please choose the width you need.   Additional information XL Pallet LPXL 13.25" W x 16" L, Slee...

Description The registration system latches onto the registration bearing block to hold the print pallets in the correct position. They are not...

Description The frame holder bracket holds the frame into the print head.   Additional information Weight 0.394 lbs

Description Screen Clamps Knob is for the LP and LPXL Series. The frame attach screw secures the frame to the frame holders. There are four on eac...

Description This air fitting is present on the manifold of the machines. There are several different sizes of this type of fitting, so make sur...

Description This air fitting is present on the manifold of the machines. There are several different sizes of this type of fitting, so make sure ...

Description The air solenoid attaches to the manifold and supplies the various cylinders in the machine with air pressure. The LP-1 uses 2, the LP...

Description The Squeegee Cylinder Thumbscrew O-rings cushion the impact between the squeegee cylinder and the carriage. There are two different s...

Description The squeegee flipper block attaches the squeegee pin to the carriage.   Additional information Weight .225 lbs

Description The squeegee flipper shaft connects the squeegee flipper block to the carriage.   Additional information Weight .1728 lbs ...

Description The squeegee pin attaches the squeegee to the carriage.   Additional information Weight .0658 lbs

Description The stepper motor rotates the print pallets, moving the garments underneath the print heads and flash cures. It includes a welded...

Description Stepper Motor Driver   Additional information Weight 3 lbs

Description For the LP and LPXL Series. The stroke stop sensor is a magnetic switch that stops the squeegee carriage at the appropriate position a...

Description This air fitting splits the tubing in the machines. There are different sizes of this type of fitting, so please make sure you are or...

Description The T-head adjust knob holds the flash cure cover to the flash cure bracket. there are different sizes of this part, so please make s...

Description The T-head adjust knob holds the parts sensor bracket to the limit switch bracket. there are different sizes of this part, so please m...

Description 5/16-18 Econonuts hold the pallets to the pallet arms and holds several assemblies together on the print head. We cannot offer most o...

Description The toggle switch actuates the index assembly. It is present on the LP-2, LP-3, LP-4, and LP-2XL.   Additional information Weight ...

Description 4.3″ Human Machine Interface touchscreenThe touch screen allows you to control and interact with the machine.   Additional informati...

Description This air fitting is present on the manifolds in the machines. It has 1/8 NPT threading.   Additional information Weight 0.0246 lbs...