ASPE

Description The terminal connects wires in the electrical system. There is a 4 port and a 5 port version, so please make sure you are ordering th...

Description The terminal connects wires in the electrical system. There is a 4 port and a 5 port version, so please make sure you are orderin...

Description The 1/4-20 thread adjust knob is used in several places on the print head. Mainly for locking the registration in place. There are fou...

Description The air regulator supplies the machine with air, regulates its pressure, and lubricates the machine. It includes a pressure gauge.   ...

Description The air manifold connects the air source to the solenoid valves.   Additional information Weight 1 lbs

Description The Air Pressure Switch attaches to the manifold. It detects whether air pressure is present and will warn you if that isn’t the case...

Description Air Tubing it is sold by the foot. There are several different sizes of air tubing, so please make sure you are ordering the correct o...

Description The backlash assembly regulates the distance between the two drive gears. the backlash set screw is an integral part of the assembl...

Additional information Weight 0.116 lbs

Description The bronze bushings are used in several places on the machine where a shaft moves.   Additional information Weight 0.0058 lbs ...

Description The circuit breaker protects the machine’s electrical components from power surges. There are also 16A and 20A circuit breakers in the...

Description The circuit breaker protects the machine’s electrical components from power surges. There are also 10A and 20A circuit breakers in ...

Description The circuit breaker protects the machine’s electrical components from power surges. There are also 16A and 10A circuit breakers in t...

Description The communication cable connects the touchscreen of the machine to the PLC. This allows the machine and its user to communicate.   Ad...

Description The cord connector holds the power cable in place and protects it from the edges of the sheet metal control box. The LP-1 uses a di...

Description The cord connector holds the power cable in place and protects it from the edges of the sheet metal control box. This part is in us...

Description The back lash assembly regulates the distance between the two drive gears. It is located next to the indexing motor and motor cover...

Description The E-stop provides a quick and easy way to shut off the machine in case there are any problems.   Additional information Weight...

Description This air fitting is present on the air cylinders of some machines. There are several different sizes of this type of fitting, so plea...

Description Flash cure bulbs generate the light and heat necessary to cure the ink.   Additional information Weight 0.029 lbs

Description Flash cure bulbs generate the light and heat necessary to cure the ink.   Additional information Weight 0.029 lbs

Description Flash cure bulbs generate the light and heat necessary to cure the ink.   Additional information Weight 0.029 lbs

Description Flash cure bulbs generate the light and heat necessary to cure the ink.   Additional information Weight 0.029 lbs

Description Flash cure bulbs generate the light and heat necessary to cure the ink.   Additional information Weight 0.029 lbs

Description Each flash cure has a square of insulation inside to retain the heat generated by the lamps.   Additional information Weight 0.2 l...

Description The flash cure reflector focuses the light and heat from the lamps onto the product to help facilitate curing.   Additional informati...

Description 1000W Socket (LP1 – LP4) The flash cure lamp socket holds the halogen bulbs in the flash cure units.   Additional information Weigh...

Description 1500W Socket (Large Automatics) The flash cure lamp socket holds the halogen bulbs in the flash cure units.   Additional information ...

Description The size of the flood bar should match the size of the pallets and squeegees of your machine. Inches to CM Converter Flood Bar ...

Description This flow control is used for the stroke cylinder, see on the image the position, where it is used. INFO: This flow control fitting i...

Description The screen lift cylinder raises and lowers the screen on the print head. Each print head has 2 of them.   Additional information ...

Description Stroke Cylinder for the LPXL Series.

Description Aluminum/Aluminium Screen for the LP2, LP3, and LP4 Printer only. Screen Frame 9″×14″ | 22.86×35.56cm We stock printing screens with s...

Description The squeegee cylinder raises and lowers the squeegee on the print head. Each print head has two of them. This part does not include th...

Aluminum/Aluminium Screen Printing Frames with Mesh for the LP1 Printer only. 9″x20″ | 22.86×50.8cm We stock printing screens with several differe...

Description The size of the squeegee should match the size of your pallets and flood bar. LP1-LP4 Squeegee Holders (all triple durometer 65/90/...